MSO-19 USB 2GSa/s Oscilloscope, 200MSa/s Logic Analyzer, 100MSa/s Pattern Generator and TDR

The MSO-19 is a portable USB based 2GSa/s Oscilloscope, 200MSa/s Logic Analyzer, 100MSa/s Pattern Generator and TDR. All channels sample simultaneously at a max rate of 200MSa/s (5ns), includes probe, clips, wires and software. The device works with Windows XP/Vista/7/8. The MSO-19 has time synchronized oscilloscope and logic analyzer inputs. All 9 channels are sampled at the same time and are displayed together. This is better than separate instruments because the analog and digital waveforms are acquired with the same sample clock assuring accurate time correlation between the two. Even if you went through the effort of cabling two individual instruments together, you would not be able to get the samples to within 5 ns of each other, nor would the triggering be so tightly coupled. Since the software displays the oscilloscope and logic analyzer data on the same screen it stays synchronized no matter how you scroll or zoom.

The MSO-19 can trigger on the Oscilloscope, Logic Analyzer, SPI or I2C inputs. Since all of the 9 inputs sample at the same time you will see a fully synchronized display of all the digital and analog inputs. Oscilloscope trigger: Rising edge, falling edge and pulse width. Logic Analyzer trigger: 8 bit trigger word, SPI trigger: 32 bit trigger word, I2c trigger: 32 bit trigger word. The 100Mpt/S pattern generator has many features not found on other pattern generators.  Since it has shared pins with the Logic Analyzer the pattern data can be tri-stated to create bidirectional bus signals.  The PG also runs on an independent clock from the logic analyzer, hence you can create a slow signal and analyze the response at a much faster sampling rate.  The pattern buffer length is adjustable and can be looped to create complex patterns.  The PG can start manually or be synchronized with the MSO trigger inputs. High speed sampling is key to getting a good capture.  The 200MSa single shot sample rate and 60MHz bandwidth will allow you see a great picture of a 60MHz signal in single shot mode and an even faster one if you use RIS mode sampling. The FFT Spectrum Analyzer has controls for FFT window, FFT type, FFT resolution. The software also supports averaging, memory and plot subtraction.  This allows for a whole range of spectral analysis including: Frequency response analysis, Power supply noise analysis, etc...

MSO-19 USB 2GSa/s Oscilloscope, 200MSa/s Logic Analyzer, 100MSa/s Pattern Generator and TDR

What are the Pin-Outs from PCMCIA PC Card to CompactFlash when using a CF Adapter?

What are the Pin-outs from PCMCIA PC Card to CompactFlash when using a CF Adapter? j.mp/15ffDWf twitter.com/synchrotech_in…

— Synchrotech, Inc. (@synchrotech_inc) May 30, 2013

What are the Pin-outs from PCMCIA PC Card to CompactFlash when using a CF Adapter?

FireNEX COAX S800 75ohm COAX BNC FireWire 800 IEEE1394b Repeater Kit

The FireNEX-COAX-S800 uses flexible coaxial cabling to provide reliable FireWire 800 transmission up to 60 meters (196 feet). There are several advantages in using a standard 75 Ohm coax cable, like wide availability, excellent EMC performance, low cost connections, enabling of terminations by end users, and the possibility of using existing cabling infrastructure. Since each FireNEX-COAX-S800 repeater has two IEEE 1394b FireWire 800 ports it can also be used as a hub for daisy chain connections.

A FireNEX-COAX-S800 set includes two FireNEX COAX S800 75ohm COAX BNC FireWire 800 IEEE1394b repeaters and a manual. An available DC power jack lets you connect an optional power supply (purchased separately), such as the FIRENEX-POWER. COAX cable and FireWire/IEEE1394b cables are not included. The repeaters feature industrial standard screw locking for 1394b ports.

FireNEX COAX S800 75ohm COAX BNC FireWire 800 IEEE1394b Repeater Kit (2ct)

FireNEX800™, FireNEX-MX™, FireNEX800™-SX, FireNEX-CAT5™, FireNEX-CAT5™ S400, FireNEX-COAX-S800™, FireNEX-POF™,FireNEX-CAT5-S800™ are registered trademarks of Newnex Technology Corp. All rights reserved.

Thunderbolt Cables as long as 3 meters (9.8 feet)

Thunderbolt Cables as long as 3 meters (9.8 feet) j.mp/ZrQpEa #mac #thunderbolt twitter.com/synchrotech_in…

— Synchrotech, Inc. (@synchrotech_inc) May 20, 2013

FMJ USB 10-Pin Module Removable Solid-State Memory Storage Subsystem

The FMJ USB 10-Pin Module is a small, low cost, high performance, removable solid-state memory storage subsystem. It is an appropriate replacement for hard disk drives and host systems that require low power and small scalable storage solutions. FMJ technology is designed for customers that prefer reliable operation in harsh environments and long product life-cycle. Amongst the endless number of applications are networking products, military systems, interactive kiosks, record and playback systems, medical equipment, industrial control systems, avionics, and voting machines. Every USB 10-Pin Module is integrated with technology that prevents data corruption and loss from power anomalies. USB 10-Pin Module Pin Information.

FMJ USB 10-Pin Module Removable Solid-State Memory Storage Subsystem

OCZ Vector Series 7mm Low Profile SATA III 2.5in Solid State Drives

OCZ Vector Series 7mm Low Profile SATA III 2.5in Solid State Drives

The Vector Series delivers a new industry-leading solid state storage solution for the high-end consumer and workstation user. Meet the storage expectations you didn't know you had.

New: Contactless Near Field Communication (NFC) PC/SC Smart Card Reader ACR122U USB 2.0

The ACR122U NFC Reader is a PC-linked contactless Smart Card reader/writer developed based on the 13.56 MHz Contactless (RFID) Technology. Compliant with the ISO/IEC18092 standard for Near Field Communication (NFC), it supports not only Mifare® and ISO 14443 A and B cards but also all four types of NFC tags. ACR122U is compliant with both CCID and PC/SC. Thus, it is a plug-and-play USB device allowing interoperability with different devices and applications. With an access speed of up to 424 kbps and a full USB speed of up to 12 Mbps, ACR122U can also read and write more quickly and efficiently. The proximity operating distance of ACR122U is up to 5 cm, depending on the type of contactless tag in use.

In order to increase the security level, ACR122U can be integrated with an ISO 7816-3 SAM slot. Furthermore, the ACR122U NFC Reader is available in module form, permitting easy integration into bigger machines, such as POS terminals, physical access systems and vending machines. The ACR122U NFC Reader is ideal for both secure personal identity verification and online micro-payment transactions. Other applications of the ACR122U include access control, e-payment, e-ticketing for events and mass transit, toll road fare collection and network authentication.

Contactless Near Field Communication (NFC) PC/SC Smart Card Reader ACR122U USB 2.0

Expanded and Revised: ExpressCard FAQ for ExpressCard/34 and ExpressCard/54

Expanded & Revised: #ExpressCard FAQ for ExpressCard/34 and ExpressCard/54 j.mp/Ajr1oN twitter.com/synchrotech_in…

— Synchrotech, Inc. (@synchrotech_inc) May 16, 2013

Table of Contents

• What is ExpressCard?
• Differences between ExpressCard and PC Card
• Is ExpressCard backward compatible with PCMCIA PC Cards?
• Is PCMCIA PC Card forward compatible with ExpressCard?
• ExpressCard Dimensions
• ExpressCard Slotting
• Is there a way to stabilize ExpressCard/34 inside ExpressCard/54 slots?
• How does ExpressCard 2.0 differ from ExpressCard?
• ExpressCard versus PC Card Overview
• Is it possible to add ExpressCard slots to computers with PCIe?
• Are any hot-swap capable external solutions for SxS ExpressCards?
• Are any Thunderbolt solutions for ExpressCards?

USB 10-Pin Module Pin Information

USB 10-Pin Module Pin Locations and Pin Assignments for devices including FMJ's USB 10-Pin Module Removable Solid-State Memory Storage Subsystem

USB 10-Pin Module Pin Information by Synchrotech

Video: FarSite X.25 - TCP/IP - XOT products and solutions for network inter-communications

FarSite's products providing solutions for X.25 networks and communications between X.25, XOT and TCP/IP infrastructure with the expertise to assist in a smooth transition.

DPD200 and DPH200 DisplayPort to 2-Port Graphics Splitter Adapters

The DisplayPort to 2-Port DisplayPort (DPD200) or HDMI (DPH200) Graphics Splitter Adapters are innovative, external multi-display adapters that allows deployment of multiple monitors from a single digital DisplayPort source. The DisplayPort Graphics Splitter is usefull for a range of applications such as gaming, graphics design or spreadsheet analysis. Uses include spanning both monitors or choosing to dedicate each monitor to a separate application. These DisplayPort graphics splitter dongles lets you combine two DisplayPort (DPD200) or HDMI (DPH200) monitors as one display, at a maximum resolution of 3840x1200, to make the ultimate wide screen desktop. This graphics expansion module can also clone your primary display and function as a 2 Port DisplayPort (DPD200) or HDMI (DPH200) Video Splitter. Compatible with DisplayPort video cards, the DisplayPort (DPD200) or HDMI (DPH200) graphics splitter dongles requires no software installation for multi-display applications, and is plug-n-play—simplifying configuration and saving time. It works with standard Microsoft Windows and Linux PCs featuring DisplayPort connectivity.

DPD200 DisplayPort to 2-Port DisplayPort Graphics Splitter Adapter DPH200 DisplayPort to 2-Port HDMI Graphics Splitter Adapter